Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
Turn the temperature control dial until you hear a click – this will turn the unit on.
Continue turning the dial to your desired temperature. The temperature control
dial acts as a thermostat. Once the room has reached the desired temperature
the unit will switch off.
SWITCHING OFF
1.
Turn the temperature control dial anticlockwise to 'OFF'.
2.
Remove the power plug, store the heater after the unit has cooled down.
NOTE
-
Overheat protection: When the temperature of the heater is too high, the thermo-
stat will automatically switch off the power and the heater will stop working. After
the heater has cooled, the heater can be used normally. This may occur during
improper use or certain environment conditions.
-
Tip-over protection: When the heater is knocked over or tipped onto its side, the
safety switch will automatically cut off power. Power will return to normal when
the unit has been placed upright onto an even surface.
3 | English
Werbung
Inhaltsverzeichnis
