Herunterladen Inhalt Inhalt Diese Seite drucken

Cameo Q SPOT 15W Bedienungsanleitung Seite 34

Inhaltsverzeichnis

Werbung

IR REMOTE CONTROL / IR FERNBEDIENUNG / TÉLÉCOMMANDE INFRAROUGE / MANDO A
DISTANCIA POR INFRARROJOS / PILOT NA PODCZERWIEŃ / TELECOMANDO A INFRAROSSI
EN
In the system settings under "IR Remote", activate the control via infrared remote control (IR Remote On). Now, point the infrared remote
control directly at the infrared sensor installed on the front of the spotlight. The maximum range is about 8 metres.
BL / ON/OFF (Blackout)
The BL button is used to switch off the spot, regardless of the mode selected. Pressing the BL button once more, re-activates the previously selected
mode.
SP / SPEED
no function
/ BRIGHTNESS
Setting the brightness in 12 levels. Press the BRIGHTNESS button and then select the desired brightness by pressing the + and - buttons repeatedly
(Level 1 = blackout)
FL / FLASH (Strobe)
Enabling and setting the strobe effect in 14 speed levels. After pressing the FL button, select the flash frequency (14 levels) using the + and - buttons
(Level 1 = strobe disabled, Level 2 = slowest flash frequency, Level 14 = fastest flash frequency)
W (R, G, B, A and U without function)
Setting the brightness in 12 levels. Press the W button and then select the desired brightness by pressing the + and - buttons repeatedly (Level 1 =
blackout)
PG
no function
CM
no function
SC (music-controlled program)
To activate the sound-control mode, press SC and then use the + and - buttons as required to select the microphone sensitivity (11 levels).
AU
no function
DE
Aktivieren Sie in den Systemeinstellungen unter „IR Remote" die Steuerung durch die Infrarot Fernbedienung (IR Remote On). Richten Sie nun
die Infrarot-Fernbedienung in Sichtverbindung direkt auf den auf der Vorderseite des Strahlers verbauten Infrarot-Sensor. Die maximale Reichweite
beträgt ca. 8 Meter.
BL / ON/OFF (Blackout)
Die BL-Taste dient dazu, den Strahler abzuschalten, unabhängig davon, welche Betriebsart aktiviert ist. Bei nochmaligem Drücken der BL-Taste wird
die zuvor ausgewählte Betriebsart wieder aktiviert.
SP / SPEED
Ohne Funktion
34

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis