Iget FIT F30 Benutzerhandbuch Seite 29

EN
Basic information:
Individual technical parameters, the description of the phone
and the design may differ depending on the different versions of
the phone and updates. Precise specifications and other
information can be found on website www.iget.eu. Misprints
reserved.
The FIT F30 is IP68 certified on the basis of EN
60529:1991+A2:2013+AC:2019. The IP68 rating does not
guarantee 100% water resistance under any conditions!
(According to manufacturer 1,5 m depth for 30 minutes, IP68
resistance does not apply to salt water.) After contact with
water or other liquid, we recommend that the watch be dried
and check that the charging contact is dry before charging. The
warranty does not apply to intentional damage to smart
watches.
After the first start of your smart watch and after pairing with
iGET GO, check for a possible software update. Do not
disconnect the device from the mobile phone or move away
from the BT signal during the update.
The buyer is obliged to provide a serial number on the warranty
card as well as in the delivery note and the proof of purchase.
In this context, the buyer acknowledges that unless the serial
number of goods is not marked on the proof of purchase,
delivery note and in the warranty card and therefore it cannot
be possible to compare this serial number marked on goods and
its protective packaging with the serial number stated in the
warranty card, delivery note and the proof of purchase and thus
to verify that the goods runs from the seller, the service center is
competent to claim such a goods automatically and reject it
immediately. The buyer must instruct all persons to whom the
goods would be subsequently sold. Product complaints do with
your dealer if you are not on the web www.iget.eu indicated
29