6/ Associating A Smoke Detector; 7/ Grouped Command - DELTA DORE TYMOOV RP Serie Handbuch

6/ Associating a smoke detector

You want to control the opening of roller shutters if smoke is detected
On the transmitter that is already
associated, press the
button for more than 3 seconds
until the motor is activated
briefly.
Briefly press the button of the
detector.
The motor will briefly
be activated twice.

7/ Grouped command

When the motors have been associated via a bidirectional grouped command, they
will start up at slightly staggered time intervals (100 ms) in order to limit the peak
current in the electric line during start-up.
• If the motors were associated at the same time in a grouped command, they will
start up in the order in which they were detected during the association process.
E.g. It could be that one lounge motor starts first, followed by a bedroom motor,
then the second lounge motor. There may be a time lapse between the first and
second lounge motors starting.
• If you would like the motors to start in a specific order, you should associate them
one by one in the order you require.
Refer to the user guide for each remote control.
E.g. If you have 3 roller shutter motors in one lounge, associate them one by one
with the remote control so that they start up without a big time lapse.
> 3s
x 2
EN
41