DELTA DORE TYMOOV RP Serie Handbuch Seite 39

3.2.3 Setting 2 manual stops
❶ Position the shutter
Press the button until the shutter is
in the required position, then press
stop it.
❷ Setting the position of the first stop (e.g. Upper manual stop)
CR 2430
❸ Setting the position of the second stop (e.g. lower manual stop)
CR 2430
❹ The stops are now set. Exit the settings mode.
to
Press button B on the front panel
of the remote control,until the LED
flashes green.
Then, press and hold
the button for ~3
seconds until the motor is
activated briefly. The upper
manual stop will now be set.
Press the
to move the shutter to the
required position, then
press
Press button B on the front panel
of the remote control, until the LED
flashes green.
Then press the
for ~ 3 seconds until the motor is
activated briefly.
The lower manual stop will now
be set.
Scroll step by step
To scroll step by step, briefly press then
release the
the same time.
> 3s
button
to stop it.
button
> 3s
and buttons at
The motor
will be activated briefly.
x 2
When the setting of
the 2nd stop is completed,
the motor will validate by
activating itself twice.
EN
39