Using Fan Mode; Using The Timer Function; Automatic Switch-On - Silvercrest 9000 BTU Bedienungs- Und Sicherheitshinweise

The fan speed is automatically set
to LOW and indicated by the
fan speed indicator
speed cannot be set manually
in this mode.
To turn off the product, press the
POWER button

Using fan mode

Note: You can remove the hot air
outlet hose from the product when
13
operating in fan mode.
Press the POWER button
to switch on the product.
Press the MODE button
repeatedly until the mode indica-
tor shows FAN. The product
21
is now in fan mode. The temper-
ature is automatically set to 25 °C
and shown on the display
temperature cannot be set manu-
ally in this mode.
Push the SPEED button
to adjust the fan speed. The fan
speed indicator
selected speed (HIGH or LOW).

Using the timer function

Automatic switch-on

Push the TIMER button
when the product is off. The dis-
play flashes and the timer
20
indicator
19
. The fan
18
.
28
24
. The
20
23
shows the
18
22
lights up.
Use the TEMP– button
TEMP+ button
timer (1–24 hours). The set time
flashes on the display
Push the TIMER button
again to confirm the set time.
If the time is not confirmed and no
further entry is made, the timer
will be cancelled after about
10 seconds.
If necessary, select an operating
mode using the MODE button
. This is indicated by the
24
mode indicator
28
DEHUM or FAN). The timer will
start counting down the remain-
ing time and the product will turn
on automatically when the time
is up.
To cancel the timer function, press
the TIMER button
Automatic switch-off
(sleep timer)
Push the TIMER button
when the product is on.
Use the TEMP– button
TEMP+ button
timer (1–24 hours). The set time
flashes on the display
Push the TIMER button
again to confirm the set time. If
the time is not confirmed and no
further entry is made, the timer
/
26
to set the
27
.
20
22
(COOL,
21
once.
22
22
/
26
to set the
27
.
20
22
GB/IE 41