Silvercrest 9000 BTU Bedienungs- Und Sicherheitshinweise Seite 36

ATTENTION!
RISK OF DAMAGE!
Improper use of the product may
result in damage to the product.
Set up the product on an easily
accessible, level, dry, heat-resist-
ant and sufficiently stable surface.
Do not set up the product on the
edge of the work surface.
The product is on castors. Make
sure that it always stands on a
flat surface and cannot roll away.
To prevent a heat build-up, do
not place the product directly
against a wall or under wall
cabinets or similar.
Never place the lamp on or near
hot surfaces (hobs, etc.).
Do not allow the mains cable
to come into contact with hot parts.
Never expose the product to high
temperatures (radiators, etc.) or
to the weather (rain, etc.).
Never fill the product with liquid.
When cleaning, never immerse
the product in water and never
use a steam cleaner. Otherwise
the product may be damaged.
Discontinue using the product if
the product's plastic parts are
cracked or deformed. Always
replace damaged parts with
genuine spare parts.
36 GB/IE
Always transport and store the
product upright and avoid it
tipping.
Always place the product at a
minimum distance of 30 cm from
walls, curtains, furniture and other
obstacles on all sides.
Operate the product in rooms
with a maximum volume of 80 m³.
Do not use objects other than
those permitted by the manufac-
turer to speed up the defrosting
process.
Any person working on the refrig-
erant circuit must hold a qualifi-
cation certificate from an industry
accredited body which demon-
strates their competence in the
safe handling of refrigerants
10
using a method known to the
industry.
Service work should only be
carried out in accordance with
the manufacturer's instructions.
If the maintenance and repair
work requires the assistance of
additional people, the person
trained in handling flammable
refrigerants should constantly
supervise the work.