Specifications & Technical Data - Cabasse MC40 Betriebsanleitung

Vorschau ausblenden Andere Handbücher für MC40:

Betriebsanleitung (17 Seiten)

Betriebsanleitung (13 Seiten)

Inhalt

Seite von 17

/ 17
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

e n g l i s h

and black or minus to black or minus. Connections should

be identical for both channels. To check that the speakers are

in correct phase, switch the system to mono while music is

being played. if the amplifier does not have a phase inversion

switch, it will be necessary to change over the connections on

one only of the loudspeakers. If in correct phase, the image

should be distinctly located between the loudspeakers with a

slight loss of bass and low midrange level. If the image is confu-

sed and not centrally located and there is a drastic loss of bass

and low midrange level, recheck your connections.

HOME

THEATER CONNECTIONS

WITH AN ACTIVE SUBWOOFER

Subwoofer positioning

With a

crossover point below or around 150 Hz, the installa-

tion position of subwoofers is not limited as human ears and

brains are not able to identify the emitting point of such low

frequencies. To get the best result, it is recommended to try dif-

ferent positions and choose the one giving the best response

in the low frequencies, taking into account the room acoustics.

Hooking up the

2 possibilities

system:

the low

level one requiring the use of the

■

and LINE OUT

■

the high

level one requiring the use of the

INPUT

and HIGH LEVEL OUTPUT

loudspeaker cables.

The inputs are stereo ones, the mix of the

low

frequencies being done by the amplifier of the subwoofer.

If the input signal is already mono, only one input

(right)

should be used.

Downloaded from

www.Manualslib.com

subwoofer

are offered to connect the subwoofer with your

Cinch

RCA LINE IN

terminals and shielded coaxial connectors,

terminals and standard

(left)

manuals search engine

Interconnections with the Cinch

and LINE OUT

Connections to the

■

If your

preamplifier or your integrated amplifier is fitted with

a stereo low-level output, then connect its

outputs to the L

woofer. If your amplifier offers a one mono output, connect it

to either the

■

Connections from the

The signal

from the

tors is the one being brought in by the

connectors filtered at 40 Hz. These outputs can thus

be used to bring the signal to the amplifier powering the main

loudspeaker.

Interconnections with the

Connections to

■

If the

preamp section of your Hi Fi or audio-video system is not

fitted with a low level output, you should then connect the

subwoofer by using its loudspeaker terminals. When connec-

ting the

(left)

to the

HIGH LEVEL INPUT

ful not to cross (-) and (+) cord of either

channel. Such a phase

amplifier.

Connections

■

HIGH LEVEL

These outputs can be used to bring the signal to the main

loudspeaker systems.

The signal from the

and R (right)

PUT

plugs is the one being

INPUT

connectors. These outputs can thus be used to bring

(left)

or R

the signal to the main loudspeaker systems.

SPECIFICATIONS & TECHNICAL DATA

MC40

MINORCA

main

speaker

JAVA

main

speaker

MAJORCA

main

speaker

CABRERA

center*

FORMENTERA

surround

MERCURE

active subwoofer

* Magnetic shielding

RCA LINE IN

connectors

LINE IN

(left)

and R (right)

LINE IN

inputs of the

(left)

or the R (right)

subwoofer

LINE IN

LINE OUT

(left)

and R (right)

LINE OUT

(left)

and R (right)

speaker terminals

HIGH LEVEL INPUT

plugs

and R (right)

speaker outputs of your amplifier

plugs of the

subwoofer, be care-

(left)

inversion might damage your main

HIGH LEVEL OUTPUT

plugs

(left)

and R (right)

HIGH LEVEL OUT-

brought in by the

Position

Ways

booksheft/