Master/Slave Operation; Operation - Eurolite Led Sls-180 Rgb Bedienungsanleitung

Caution: At the last fixture, the DMX cable has to be terminated. Plug the terminator with a 120
between Signal (–) and Signal (+) in the DMX output of the last fixture.

Master/Slave operation

The master/slave operation enables that several devices can be synchronized and controlled by one master
device.
On the rear panel of the device you can find an XLR jack and an XLR plug, which can be used for
connecting several devices.
Choose the device which is to control the effects. This device then works as master device and controls all
other slave devices, which are to be connected to the master device via a DMX-cable. Connect the OUT jack
with the IN plug of the next device.
Set the desired Master-mode - „Auto" or „Sound controlled mode" - for the master-device. Set the DMX
address 1 for all slave-devices. Please refer to the instructions under chapter operation.

OPERATION

After you connected the spot to the mains, the device starts running.
MODE UP
The functions provided are described in the following sections.
MODE UP / DOWN
d001 ~ d512
DMX
STATIC
CC01 ~ CC64
COLORS
rb01 – rb16
PL01 – PL16
AUTO
Sd01 – Sd16
Sound
SOUND
r000 – r255
G000 – G255
DIMMER
b000 – b255
The LED display lights up and you can choose the desired
mode via the buttons MODE, UP, DOWN and ENTER.
Press the MODE button in order to browse through the main
menu. Browse through the submenu by pressing UP or
DOWN. Press the ENTER button in order to select the desired
menu.
DOWN
ENTER
The device features a memory function. The last program
selected will begin anew when the device is restarted.
Setting the DMX starting address
Select static color
Color change 1 -
fading, 7 colors with increasing speed
Color change 2 -
fading, 7 colors with increasing speed
Color change 3 -
switching, 7 colors with increasing speed
Sound controlled mode
Adjust the brightness of the red LEDs
Adjust the brightness of the green LEDs
Adjust the brightness of the blue LEDs
FUNCTION
18/20

resistor
00079523.DOC, Version 1.0