Technical Data; Safety Instructions - Klarstein 10006253 Anschluss- Und Anwendungshinweise

Dear Customer,
Congratulations on purchasing this Klarstein equipment. Please read this manual carefully and take care of
the following hints on installation and use to avoid technical damages. Any failure caused by ignoring the
mentioned items and cautions mentioned in the operation and installation instructions are not covered by our
warranty and any liability.
Technical Data 6
Safety Instructions 6
Product Description and Accessory 7
Use and Operation 8
Functions and Application Examples 8
Cleaning and Care 9
Disposal Considerations 9
Declaration of Conformity 9
Item number
Power supply
Power consumtion
Capacity mixing bowl
Abmessungen (WxHxD)
Gewicht
Read all the safety and operating instructions carefully and retain them for future reference.
• Make sure that the voltage shown on the rating plate corresponds with that of the mains supply. The rating
plate can be found on the bottom of the motor block.
• The motor must always be switching off before the stand mixe is connected with the mains supply.
• To avoid electric shocks, do not use this device in the vicinity of water. Do not immerse the mains lead in
water or other liquid.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
• Do not kink or clamp the mains lead. To avoid any risk of stumbling, do not allow the mains lead to hang over
the edge of a table or a counter.
• This device should not be set up in close proximity to a naked flame, easily flammable materials (curtains,
textiles, etc.), a radiator, an oven or some other heat source.
• Before use, place the device on a horizontal and flat surface.
Contents

Technical Data

1006253, 10006252, 10022087, 10022088
230 V ~ 50 Hz
1000 W
5 litres (max 2 kg dough)
36 x 33 x 23cm
8 kg

Safety Instructions

6