Getting Started; Connecting To An Amplifier And A D/A Converter - Technics ST-C700D Bedienungsanleitung

Getting started

≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥ Do not connect the AC mains lead until all other connections are complete.
≥ Insert the plugs of the cables to be connected all the way in.
≥ Do not bend cables at sharp angles.
System control connection to an SU-C700
≥ You can output digital audio signals from this unit and play back music.
≥ You can automatically link this unit with the SU-C700 and operate them easily with the remote control. (
SU-C700
≥ Do not use any other system connection cables or coaxial digital cables except the supplied one.
≥ Connect the system connection cable to the system terminal [CONTROL1] of the SU-C700.
≥ Connect the coaxial digital cable to the digital audio input terminal [COAX1 IN] of the SU-C700.

Connecting to an amplifier and a D/A converter

You can output analogue or digital audio signals from this unit and play back music files.
e.g.,
Coaxial digital cable
Audio cable
(not supplied)
Amplifier
(supplied)
This unit
(rear)
Optical digital audio cable
(not supplied)
D/A converter
28)
System connection cable
(supplied)
This unit
(rear)
9
(9)