Others; Sleep Timer; Auto Off Function; Network Standby - Technics ST-C700D Bedienungsanleitung

Others

Sleep timer

The sleep timer can switch the unit to standby mode after a
set time.
1
Press [NWP].
2
Press [MENU].
3
Press [3, 4] repeatedly to select "SLEEP"
and then press [OK].
4
Press [3, 4] to set the time (in minutes) and
then press [OK].
"30 minutes" ,-. "60 minutes" ,-. "90 minutes" ,-. "120 minutes"
^""""""""""""". "Off" !"""""""""""""J

Auto off function

This unit is designed to conserve its power consumption and
save energy. The unit will turn to standby mode automatically
if there is no sound and it is not being used for approximately
20 minutes.
≥ The factory default is "On".
To cancel this function
1
Press [NWP].
2
Press [HOME].
3
Press [3, 4] repeatedly to select "SETUP"
and then press [OK].
4
Press [3, 4] repeatedly to select
"AUTO OFF" and then press [OK].
5
Press [3, 4] to select "Off" and then press
[OK].
≥ The auto off function works unless you turn it off, even if you turn
off and on this unit.
≥ When "DAB/DAB+" or "FM" is the source, the function does not work.
26
(26)

Network standby

This unit automatically turns on from standby mode when
selected as a speaker for Spotify/AirPlay/DLNA (DMR).
Keep in mind that after selecting this unit, you may also need
to start playback to turn it on in some cases.
≥ The factory default is "Auto".
Enables the network standby function
Auto
when the network connection is available.
Always enables the network standby
On
function.
Off Turns off the network standby function.
To change this setting
1
Press [NWP].
2
Press [HOME].
3
Press [3, 4] repeatedly to select "SETUP"
and then press [OK].
4
Press [3, 4] repeatedly to select
"Network Standby" and then press [OK].
5
Press [3, 4] to select an item and then
press [OK].
≥ If this function is set to "On" or "Auto", the standby power
consumption will increase.