Using Bluetooth - Technics ST-C700D Bedienungsanleitung

Using Bluetooth

You can listen to the sound from the Bluetooth
≥ Refer to the operating instructions of the Bluetooth
≥ If you intend to use an NFC (Near Field Communication)-compatible Bluetooth
Connecting via Bluetooth
menu
Preparation
≥ Turn on the Bluetooth feature of the device and place the
®
device near this unit.
1
Press [NWP].
2
Press [N INPUT O] below [NWP] repeatedly
to select "Bluetooth".
3
Press [MENU].
4
Press [3, 4] repeatedly to select "Pairing"
and then press [OK].
5
Press [3, 4] to select "Yes" and then press
[OK].
≥ "Pairing" is indicated on the display.
6
Select "ST-C700D" from the Bluetooth
device's menu.
≥ The name of the connected device is indicated on the
display.
≥ If prompted for the passkey, input "0000".
≥ You can register up to 8 devices with this unit. If a 9th device is
paired, the device that has not been used the longest will be
replaced.
®
audio device from this unit wirelessly.
®
® device for details.
Connecting by NFC
®
For NFC-compatible Bluetooth
devices with version 4.1 or later) only
With the touch of an NFC (Near Field Communication)-
compatible Bluetooth
series of steps from registering a Bluetooth
connecting it to this unit.
Preparation
≥ Turn on the NFC feature of the device.
1
2
3
4
5
®
6
≥ If you connect another NFC-compatible Bluetooth
previously connected device will be disconnected automatically.
≥ When the connection is established, playback may start
automatically depending on the type of device being used.
≥ Connecting by NFC may not work properly depending on the type
of device being used.
≥ Do not make an NFC connection in any other way than instructed
in the Operating Instructions. Doing so may cause malfunction.
device, proceed to "Connecting by NFC".
®
device to this unit, you can complete a
®
Press [NWP].
Press [N INPUT O] below [NWP] repeatedly
to select "Bluetooth".
Press [MENU].
Press [3, 4] repeatedly to select "NFC" and
then press [OK].
Press [3, 4] to select "Yes" and then press
[OK].
Touch and hold your device on the NFC
touch area of this unit within 20 seconds.
( 7)
≥ Do not move the Bluetooth
message or reacts in some way.
Once the Bluetooth device has reacted, move the
®
device away from this unit.
– When the connection of the Bluetooth
the name of the connected device is indicated on the
display.
– The location of the NFC touch area differs depending on the
device. When a connection cannot be established even if
your Bluetooth ® device has touched the NFC touch area of
this unit, change the position of the device.
devices (Android™
®
device to
®
device until it displays a
®
device is complete,
®
device, the
®
(21)
21