Functional Description; Putting Into Operation - Abicor Binzel EWR PRO Betriebsanleitung

EWR RPO/BASIC
4.2 Storage

5 Functional Description

1
13
Connection of 24V power supply unit
1
Orange LED
2
Flow rate indicator
3
+ arrow
4
Green control diode
5
Functional Description
Fig. 2

6 Putting into operation

Physical storage conditions in a closed environment:
 See Tab. 2 Ambient temperature on page EN-4
The gas monitoring system EWR RPO/BASIC will adjust the gas supply
according to a curve adjusted in accordance with the welding process.
With the factory setting, the EWR will vary the flow rate between 14 l/min and
21 l/min.
2 3 4 5
12 11
Red control diode
6
Shunt
7
Shunt connection
8
ON/OFF switch
9
DANGER
Risk of injury
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Close off the shielding gas supply.
• Switch off the power supply.
6 7
10 9 8
10 Gas discharge line
11 Connection for accessories
12 - arrow
13 Gas supply line (max. 6 bar)
5 Functional Description
EN - 7