Technical Data; Power Adaptor - BASETech 2147830 Bedienungsanleitung

14. Technical data

a) General
Input..................................................................5 V/DC, 1.7 A max.
Battery ..............................................................Li-Ion 4 V, 1500 mAh
Running time ....................................................approx. 50 min (continuous)
Charging time ...................................................approx. 1 hr
No-load speed ..................................................200 rpm
Rotation ............................................................clockwise / anti-clockwise (switchable)
Cutting disc .......................................................ø43 mm
Bit material ........................................................CrV
Chuck ...............................................................6.35 mm (1/4") Hex
Sound pressure level ........................................L
Sound power level ............................................L
Vibration level (according to EN 62841) ...........a
Torque ...............................................................max. 4 Nm/2.8 Nm
Operating/storage conditions ............................-20 to +60 °C, 35 - 85 % RH (non-condensing)
Dimensions (L x W x H) ....................................approx. 138 x 112 x 44 mm (product)
Weight ..............................................................380 g
b) Power adaptor
Input voltage .....................................................100 - 240 V/AC, 50/60 Hz 0.3A
Output ...............................................................5 V/DC, 1.7 A
The noise level of the appliance may exceed 80 dB(A). Wear suitable ear defenders to prevent hearing
damage.
• The vibration emission value stated in this manual was obtained using a standardized EN 62841 test
The result can be used to compare vibration levels of different electrical tools. It can also be used to obtain a
preliminary estimate of your exposure to vibrations.
• The specified value indicates the vibration level when the tool is used for its intended purpose. The actual vibration
level may differ from the specified value if the tool is used for other purposes, if other tools are used, or if the tool
has not been serviced properly. These factors can considerably increase your exposure.
• For an accurate estimate of your exposure, you must also account for the times when the appliance is switched off
or switched on but not actually in use. These factors can considerably reduce your exposure.
• Take additional safety measures to protect the user against the effects of vibration, e.g.: Maintenance of electric
tool and insertion tools, keeping your hands warm, organisation of work processes.
= 66.2 dB(A), K = 3 dB(A)
PA
= 77.2 dB(A), K = 3 dB(A)
WA
= 0.8 m/s², K = 1.5 m/s²
h
procedure.
31