Care And Cleaning; Declaration Of Conformity (Doc) - BASETech 2147830 Bedienungsanleitung

11. Care and cleaning

Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
Do not allow water or moisture to get inside the appliance.
1
Disconnect the product from the mains and allow to completely cool down before each cleaning.
v
• Lock the switch in the off position by sliding the rotation direction switch (13) to the middle.
• Always clean the product immediately after use to prevent dust and dirt from settling.
• Keep dust and dirt off the safety mechanisms, ventilation slots and the motor housing.
• Thorough cleaning keeps the product in a usable condition so that you can enjoy it for a long period of time. A good
craftsman is careful with his tools!
• Remove dust and milling waste using a clean, long-haired brush and a vacuum cleaner. Compressed air (at a low
pressure) can also be used here.
• Use a dry, clean and lint-free cloth to clean the exterior of the product.

12. Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the
following directives.
2006/42/EC
It was manufactured in accordance with the following standards:
EN62841-1:2015
EN62841-2-2:2014
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number in the search box. You
can then download the EU declaration of conformity in PDF format.
13. Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of
its service life, dispose of the product in accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
30