ASROCK A55M-DGS Handbuch Seite 25

Downloaded from www.Manualslib.com
ATX Power Connector
(24-pin ATXPWR1)
(see p.2 No. 7)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
ATX 12V Power Connector
(4-pin ATX12V1)
(see p.2, No. 1)
Serial port Header
(9-pin COM1)
(see p.2 No.21)
2.10 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.11 Installing Windows
XP 64-bit With RAID Functions
If you want to install Windows
on your SATA / SATAII HDDs with RAID functions, please refer to the document at
the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
ASRock A55M-DGS Motherboard
manuals search engine
Please connect an ATX power
12 24
supply to this connector.
1 13
20-Pin ATX Power Supply Installation
Please connect an ATX 12V
power supply to this connector.
This COM1 header supports a
serial port module.
® TM
7 / 7 64-bit / Vista / Vista
® TM TM
7 / 7 64-bit / Vista / Vista 64-bit / XP / XP 64-bit
12 24
13
1
TM
64-bit / XP /
25