Epson TM-U295 Bedienungsanleitung Seite 2

Printer Parts
DIP Switch Tables
Serial interface
SW Function
1 Data receive error
2 Receive buffer
3 Handshaking
4 Data word length
5 Parity check
6 Parity selection
7, 8 Transmission speed
(See Serial transmision speed table.)
9 Pin 6 reset
10 Pin 25 reset
TM-U295/U295P Specifications
Printing method
Printing direction
Characters per line
(default)
Character matrix
Character size
Number of characters
Print speed
Paper feed speed
Line spacing (default)
Paper types
Paper size
2
Downloaded from www.Manualslib.com
3
upper case
2
POWER switch
1
document table
ON
Ignored
35 bytes
XON/XOFF
7 bits
Yes
Even
Used
Used
Impact dot matrix, 7-pin shuttle type
Unidirectional
5 × 7 font: 35; 7 × 7 font: 42
5 × 7 with 1-dot spacing (normal dots)
7 × 7 with 3-dot spacing (half dots)
5 × 7 font: 1.6 × 2.9 mm {0.063 × 0.114"}
7 × 7 font: 1.3 × 2.9 mm {0.051 × 0.114"}
Alphanumeric characters: 95; International characters: 32
Extended graphics: 128 × 4
1.9 to 2.3/lines/sec. (both 5 × 7 and 7 × 7 fonts)
Approx. 12.5 lines/second (52.9 mm/second {2.1"/second})
4.23 mm {1/6"}
Normal, pressure-sensitive, and carbon-copy
80 × 69 mm {3.15 × 2.72"} (W × L) to 182 × 257 mm {7.17 × 10.12"} (W × L)
manuals search engine
4
printer cover
Serial transmission speed
OFF 8 7 Transmission speed
Prints "?" ON ON 1200 bps
512 bytes ON OFF 2400 bps
DTR/DSR OFF ON 4800 bps
8 bits OFF OFF 9600 bps
No
Parallel interface
Odd
SW Function
1 Auto line feed Enabled
Not used
2 Receive buffer 35 bytes
Not used
3~9 Undefined
10 Internal use
5
control panel
ON OFF
Disabled
512 bytes
— —
Fixed to ON