Before Starting The Equipment - HERKULES SHZ 125/250 Originalbetriebsanleitung

SHZ 600
Voltage (V) ..................................... 230 V ~ 50 Hz
Rated current (A) ............................................ 4,6
Power consumption (W) ............................... 1050
Operating mode ........................... S3 20% 10 min
Rated load (kg) ......................................300 / 600
Lifting height (m) ....................................11,5 / 5,7
Rated speed (m/min) .....................................8 / 4
Diameter of steel cable (mm) .......................... 4,5
Tensile strength of the
steel cable (N/mm²) ..................................... 1770
Insulation class .................................................. B
Protection class ........................................... IP 54
Drive unit class ................................................ M1
Net weight (kg) .............................................. 17,5
Maximum number of windings: .......................... 5
Operating mode S3 – 20% - 10 minutes: S3 =
Intermittent mode without infl uencing the starting
process. This means that the maximum operating
period over a time of 10 minutes is 20% (2 minu-
tes).
SHZ 1000
Voltage (V) ..................................... 230 V ~ 50 Hz
Rated current (A) ............................................ 7,4
Power consumption (W) ............................... 1600
Operating mode ........................... S3 25% 10 min
Rated load (kg) ......................................500 / 999
Lifting height (m) ....................................11,5 / 5,7
Rated speed (m/min) .....................................8 / 4
Diameter of steel cable (mm) .......................... 5,6
Tensile strength of the
steel cable (N/mm²) ..................................... 1770
Insulation class .................................................. B
Protection class ........................................... IP 54
Drive unit class ................................................ M1
Net weight (kg) ................................................. 31
Maximum number of windings: .......................... 4
Operating mode S3 – 25% - 10 minutes: S3 =
Intermittent mode without infl uencing the starting
process. This means that the maximum operating
period over a time of 10 minutes is 25% (2.5 mi-
nutes).
Anl_SHZ_125_1000_SPK7.indb 15 Anl_SHZ_125_1000_SPK7.indb 15
GB
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
•
The cable hoist is not suitable for transporting
hot and/or molten masses and in addition it is
not suitable for use at low temperatures or in
aggressive atmospheres.
•
It is in mechanical group M1.
•
The service life of the cable hoist is approxi-
mately 8000 cycles (excluding wearing parts).
When the hoist has completed 8000 cycles,
all its mechanical parts must be checked and
overhauled.
•
Read and absorb the operating instructions
before you use the cable hoist.
•
Ensure that the operator knows how the ma-
chine works and how it should be operated.
•
The user should always operate as set out in
the operating instructions.
•
The cable hoist is not designed for conti-
nuous operation. Its mode of operation is:
Intermittent mode without influencing the star-
ting process.
•
The rated capacity of the machine does not
vary due to the position of the load.
5.1 Unpacking
After opening the packaging, inspect the frame,
the steel cable, the hook and the electric control
mechanism for signs of possible transit damage.
- 15 -
17.04.15 12:25 17.04.15 12:25