Specifications; Important Safety Instructions - Makita DTW250 Betriebsanleitung

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Switch trigger
6 Lamp
7 Reversing switch lever
8 Socket
9 Anvil

SPECIFICATIONS

Model
Capacities
Square drive
No load speed (min
Impacts per minute
Max. fastening torque
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for fastening bolts and nuts.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
CORDLESS IMPACT WRENCH SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2. Wear ear protectors.
3. Check the socket carefully for wear, cracks or
damage before installation.
4. Hold the tool firmly.
Explanation of general view
10 O-ring
11 Pin
12 Hook
13 Screw
14 Groove
15 Standard bolt
16 Fastening torque
17 Fastening time
18 Proper fastening torque
Standard bolt
High tensile bolt
–1
)
ENE036-1
GEA010-1
GEB049-2
19 High tensile bolt
20 Limit mark
21 Rear cover
22 Screws
23 Spring
24 Arm
25 Recessed part
26 Carbon brush cap
27 Hole
DTW250
M10 – M16
M10 – M14
12.7 mm
0 – 2,200
0 – 3,200
230 N•m
165 mm
1.6 kg
D.C. 14.4 V
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6. The proper fastening torque may differ depend-
ing upon the kind or size of the bolt. Check the
torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
DTW251
M10 – M16
M10 – M14
12.7 mm
0 – 2,100
0 – 3,200
230 N•m
165 mm
1.5 kg
D.C. 18 V
ENC007-7
5