Sony Alpha 7II Gebrauchsanleitung Seite 36

Audio Recording
Audio Rec Level
Audio Out Timing
Wind Noise Reduct.
Memory recall
Memory
(Custom Settings)
Zebra
MF Assist
Focus Magnif. Time
Grid Line
Marker Display
Marker Settings
Audio Level Display
Auto Review
DISP Button
GB
36
Functions that can be selected using the MENU button
Sets whether to record audio when shooting a movie.
(On/Off)
Adjusts the audio recording level during movie recording.
(0 to 31)
Sets the timing of audio output during the movie recording.
(Live/Lip Sync)
Reduces wind noise during movie recording.
(On/Off)
Calls up settings pre-registered in [Memory].
(1/2/M1-M4)
Registers the desired modes or camera settings.
(1/2/M1-M4)
Displays stripes to adjust brightness.
(Off/70 to 100/100+)
Displays an enlarged image when focusing manually.
(On/Off)
Sets the length of time the image will be shown in an
enlarged form.
(2 Sec/5 Sec/No Limit)
Sets a grid line display to enable alignment to a structural
outline.
(Rule of 3rds Grid/Square Grid/Diag. + Square Grid/Off)
Sets whether to display the marker on the monitor when
recording movies.
(On/Off)
Sets the marker displayed on the monitor when recording
movies.
(Center/Aspect/Safety Zone/Guideframe)
Sets Audio Level Display.
(On/Off)
Sets auto review to display the captured image after shooting.
(10 Sec/5 Sec/2 Sec/Off)
Sets the type of information to be displayed on the monitor or
in the viewfinder by pressing DISP on the control wheel.
(Monitor/Finder)