Selecting A Channel - LD Systems LDMEI1000G2 Bedienungsanleitung

3
3
SELECTING A FREQUENCY GROUP
Press the SET button repeatedly on the receiver until "GROUP" appears and starts to flash. Press the keys
frequency group.
4
4

SELECTING A CHANNEL

Press the SET button until "CHANNEL" appears in the display and flashes, and then select .
5
5
EQUALIZER
Press the SET button repeatedly until "EQ" appears in the display and flashes. Use the buttons
should be enabled (EQ ON), or disabled (EQ OFF). When the EQ is enabled, the treble at 10kHz is increased by around 6dB.
6
6
LIMITER
Press the SET button repeatedly until "LIMITER" appears in the display and flashes. Using the
or disable (limiter OFF) the limiter.
7
to select the desired
the desired channel using.
to determine whether the Equalizer
button, you can enable (Limiter ON)
11