Using External Usb Disk For Recording - Haier Lt26K3/R3A Bedienungsanleitung

Downloaded from www.Manualslib.com

Using External USB Disk For Recording

1. Insert the USB device with FAT32 format into the USB1
connector. Then, press MENU button.
Note: Only USB1 is available for recording.
2.Press button to select FUNCTION menu,
press button to enter .
3.Press button to select Recorder. Press OK
button to enter the submenu.
4.Press button to Select Disk and press
or OK button to enter. Press
select disk if your device has several disks.
5.Press button to select Format and press
enter. Press button to select the size you want
to format .Press OK button to format the USB Disk.
NOTES: The system will format the whole device and
if your device size is bigger than 1GB, you can set
the size which is used for time shift.
6.Format may take several minutes and the time is
depending on the memory size. Press
to select the Time Shift Disk Size. The max device size
for Time Shift is 8GB.Then, press OK button to save.
NOTES: If you select all the size format for time shift,
you can not do any recording.
7.Waiting for the system checking. And you can see the speed
data after the success checking.
NOTES:
1. Only have to format when you use the device for record for the first time.
2. The minimum device size for record is 1GB. Provide device formatting function
is up to 2TB. The max Multi-Partition is 16 partitions and one is active at a time.
3. Bit rate:
Device bit-rate>4.5MB/s REC is safe at HD stream
Device bit-rate>1.5MB/s REC is safe at SD stream
Device bit-rate<600KB/s REC is bad for REC
4. The system can not work normally if the USB device have the listing problem
below:
The device has bug.
The device has error block.
The device reports the unfaithful size.
IMPORTANT : USB device should be format as FAT32 format by
your PC before insert to the USB connector.
manuals search engine
Menu
Select Disk
Check File System
USB Disk
Format
Time Shift Size
button to
Speed
File System Size
to
File System Size
SD 27Min
OK
Do not unplug USB device
Formating.....
button
Time Shift Size
Time Shift Size
SD 14Min
OK
Ok USB1 C:
Ok start
Ok
All
HD7Min
CANCEL
Format
All
HD4Min
CANCEL