Connecting Headphones; Power Cable Connection - VINCENT SV-122 Bedienungsanleitung

Digitaler rds av mehrkanal-receiver

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

These stereo RCA connectors (19) are only needed, if you want to add one or more main amplifiers for

additional speakers.

SV-122

This could be of use if you want to listen to stereo music with higher-quality speakers and use a compact

cinema surround speaker set for movies.

CONNECTING A DISPLAY (TV, VIDEO BEAMER, ETC.)

The receiver owns two video output connectors (21): one for Composite Video (RCA) and one for the S-Video

(Mini-DIN) signal type. The last mentioned transmits separate color and brightness signals and thus has

higher picture quality compared to Composite video.

SV-122

All display devices that accept one of those signal and connection types can be used with this receiver.

The most used displays are TV and video beamers.

If the displaying device has additional video inputs, they can be used to accept the video signals of sour-

ce devices that have audio connection with the SV-122 receiver.

A set of headphones equipped with a standard

6.3 mm plug can be plugged into the "PHONES"

jack (11) (stereo, analog) at the front panel. As long

as a headphone is connected, the speakers and the

preamplifier outputs "PRE" (19) and "SW" (18) of

the system are muted. We recommend setting the

To establish the power supply push the plug of the

power cable into the AC socket on the back panel

and connect the plug on the other side of the cable to

Downloaded from

www.Manualslib.com

STEREO PREAMPLIFIER OUTPUT "PRE"