Loudspeaker Connection - VINCENT SV-122 Bedienungsanleitung

Remove plastic protective covers
Prior to the first installation, remove
the plastic protective covers on all
used connectors.
Connections
Most of the input, output, audio and video con-
nectors are mechanically identical RCA jacks.
Pay attention to connect the cables to the associa-
ted ones!
Connection quality
Make sure all connections are tight. Loose connec-
tions may cause noise, failure or malfunctions.
Interconnection Cables
To achieve best performance only quality interconnection cables as produced by Vincent should be
utilized. Prefer shielded audio cables. Consult your audio specialist dealer.
Downloaded from www.Manualslib.com
FOR YOUR SPECIAL ATTENTION:
1
O U T P U T
- false -
- right -
manuals search engine
RCA Connection
Do not interchange connectors for right and left
2
channel. At most audio equipment, RCA connec-
tors are color-coded
using red for the right
O U
channel and white or
black for the left channel.

Loudspeaker Connection

Use speaker cables with connectors (for example
banana connectors) for safety.
Make sure that unprotected speaker cable ends
can not touch each other or the metal of the recei-
ver housing!
Connect only one speaker cable wire to one screw
connector!
Mind the polarity of the speaker cable. Match it to
the polarity of the screw terminals (positive = red
= marked side of the cable). If one speaker has
false connection polarity, sound quality reduces
dramatically.
Use only speakers with a nominal impedance of
not less than 4Ω.
Vincent
45