AKG MicroMic III Serie Bedienungshinweise Seite 14

2.1 Introduction
Important!
2.2 C 418
2.2.1 Connecting
to Balanced
Refer to fig. 1.
XLR
Fig. 1: Connecting to a balanced input.
Refer to fig. 1.
14
Downloaded from www.Manualslib.com
1 Description
phantom power adapter, or AKG bodypack
transmitters.
2 Interfacing
The C 418
fore needs a power supply.
Using any power supply other than those
recommended by AKG may damage your
microphone and will void the warranty.
PP 1. Connect the phantom power adapter (1) on the
III
microphone cable to a balanced XLR micro-
phone input with phantom power.
Inputs 2. Switch the phantom power on. (Refer to the in-
struction manual of the unit to which you
connected your microphone.)
Phantom
1
2
3. If your mixer provides no phantom power:
Connect the phantom power adapter (1) to an
optional AKG phantom power supply (2) (N 62 E,
N 66 E, B 18, B 15) and use an XLR cable (3)
(e.g., an optional MK 9/10 from AKG) to connect
manuals search engine
is a condenser microphone and there-
III
XLR
1
3