Receiving A Call - Plantronics A20 Benutzerhinweise

USAGE INSTRUCTIONS
UK

RECEIVING A CALL

While wearing the headset, when your telephone rings take the handset off-hook. Press the
Headset/Handset Selector Button (7) once to display indicator lights and talk normally.
Note: If the Amplifier is left in the Headset mode, simply take the Handset off-hook to answer
the call (see diagram A, page 1).
CONFIGURATION SETTING
The electronic configuration of telephone systems can vary. You can optimise the performance of
your Amplifier by stepping through the four configuration settings. The Configuration Dial (12)
is located on the left side of the Amplifier in front of the handset jack.
Place a call to a co-worker and while speaking turn the Configuration Dial (12) clockwise
until you achieve the best sound. A paper clip can be used to make turning the configuration
dial easier.
Experimenting with these four settings will not harm the amplifier or your telephone.
EARCONS AUDIBLE CUES
Your Amplifier provides both visual and audio feedback for all operator adjustments. EarCons
provide audio feedback in the form of different toned beeping sounds for different functions.
Double beeps indicate the ends and mid point ranges of each function.
The intensity of the EarCon Audible Cue can be increased, lowered, or turned off
(three levels plus off).
Simply hold down the Mute Bar (6) then depress the Volume Rocker Switch (3) (∨ decreases
volume or turns off EarCon; ∧ increases EarCon Volume) (see diagram E, page 1).
Even though the user hears the EarCon, the calling party does not, even if you make adjustments
midway through a call.
7
Downloaded from www.Manualslib.com manuals search engine