Care And Cleaning - Nabo GS 2270 Bedienungsanleitung

Fridge / Freezer conversion
The temperature setting will be changed once you press the [Fridge/Freezer] button.
Then, the refrigerator will run according to the new temperature setting after 15s.
Temperature setting
If no failure, the screen displays the setting temperature of the refrigerator room.
Press the temperature botton for 3 seconds to achieve Fridge/Freezer conversion, the
corresponding temperature icons shine.
Quick cooling mode
Under refrigerator mode: press the temperature button until the icon
During quick cooling mode, the refrigerator runs according to the temperatures set
at 2°C, and it will exit this mode automatically after running for 150 minutes or
temperature setting or mode setting.
Quick freezing mode
Under freezer mode, press the temperature button until the icon
freeze mode, the refrigerator runs according to the temperature set at -24°C, it will exit this
mode automatically after running for 24 hours or temperature setting or mode setting.

CARE AND CLEANING

Defrosting
The refrigerator is made based on the air-cooling principle and thus has automatic
defrosting function. Frost formed due to change of season or temperature may also be
manually removed by disconnection of the appliance from power supply or by wiping
with a dry towel.
Out of operation
• Power failure: In case of power failure, even if it is in summer, foods inside the
appliance can be kept for several hours; during the power failure, the times of door
opening shall be reduced, and no more fresh food shall be put into the appliance.
• Long-time nonuse: The appliance shall be unplugged and then cleaned; then the
doors are left open to prevent odor.
•
partitions, vegetable holder, freezing chamber drawers and etc. with tape, and
the appliance shall not be laid upside down or horizontally, or be vibrated; the
inclination during movement shall be no more than 45°.
EN
lighten
lighten. During quick
31