Product Description - Concept COOK SM1000 Bedienungsanleitung

EN

PRODUCT DESCRIPTION

1. Measuring cup
2. Container lid
3. Lid seal
4. Glass container
5. Base
6. Pre-set programs
7. Start/Stop button
8. Performance speeds
9. Pulse/Ice crushing button
10. Buttons for setting the heating time/level
11. Timer indicator
12. Heating level indicator
1
2
3
4
5
46
12 11 10
2
6 7 8 9
OPERATING INSTRUCTIONS
NOTICE
Before putting a new appliance into operation, you should wipe it thoroughly from the outside with a damp cloth and
wash all removable parts in warm water for hygienic reasons.
The appliance has a built-in safety fuse. The appliance motor can only be switched on if the accessories are properly
fitted. Do not bypass the safety mechanism!
Never leave the appliance unattended while in operation or switched off, but plugged in!
Immediately after switching off the motor and unplugging the power cord, some parts may be still moving
for a while. Wait until the accessory has completely stopped before opening the lid.
USE
1. Place the container on the blender base. Before putting the appliance into operation, check that the container is
correctly seated in the base.
2. Place the food in the container and place the lid on the blender container (the recommended size of inserted food
is 2 x 2 x 2 cm). Rotate the lid until it snaps into the grooves of the blender container (Fig. 1).
4
5
3. Connect the appliance to the mains.
4. Select a preset program (see mixing programs) or continuous mixing.
5. Remove the container from the motor base only if the motor is not running.
Note: The appliance is equipped with a safety fuse. It will not work without properly fitted container and lid.
NOTICE
In case of pre-set hot programs, we do not recommend adding food during the program. There is a danger of scalding.
SM1000 SM1000
Fig. 1
EN
47