Inhaltsverzeichnis
Werbung
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure the RAID function, you need to check the installation guide
in the Support CD for proper configuration. Please refer to the document in the Support
CD, "Guide to SATA Hard Disks Installation and RAID Configuration", which is located in
the folder at the following path: .. \ RAID Installation Guide
STEP 4: Install Windows
not supported.)
After making a SATA / SATAII driver diskette and using "RAID Installation Guide" to set
RAID configuration, you can start to install Windows
the beginning of Windows setup, press F6 to install a third-party RAID driver. When
prompted, insert the SATA / SATAII driver diskette containing the Intel
reading the floppy disk, the driver will be presented. Select the driver to install according
to the mode you choose and the OS you install. You may select: "Intel(R) ICH8R/ICH9R
SATA RAID Controller (Desktop - Windows XP)" for Windows
ICH9R SATA RAID Controller (Desktop - Windows XP64)" for Windows
After the installation of Windows
RAID functions, you are allowed to use both "RAID Installation Guide" and "Intel Matrix
Storage Manager Information" for RAID configuration. Please refer to the document in the
Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration", which is
located in the folder at the following path: .. \ RAID Installation Guide and the document
in the support CD, "Guide to Intel Matrix Storage Manager", which is located in the folder
at the following path: .. \ Intel Matrix Storage Manager Information
If you want to use "Intel Matrix Storage Manager" in Windows
please install SATA / SATAII drivers from the Support CD again so that "Intel
Matrix Storage Manager" will be installed to your system as well.
2.15.2
2.15.2
Setting Up a "RAID Ready" System
Setting Up a "RAID Ready" System
2.15.2
2.15.2
2.15.2
Setting Up a "RAID Ready" System
Setting Up a "RAID Ready" System
Setting Up a "RAID Ready" System
You can also set up a "RAID Ready" system with a single SATA / SATAII hard disk. A
"RAID Ready" system can be seamlessly upgraded to RAID 0, RAID 1 or RAID 5 at a
later date by using RAID migration feature of Intel Matrix Storage. The following steps
outline how to build an Intel "RAID Ready" system.
1. Assemble the system and attach a single SATA / SATAII hard drive.
2. Set up system BIOS as step 1 of page 39. When done, exit Setup.
3. Make a SATA / SATAII driver diskette as step 2 of page 39. Begin Windows
setup by booting from the installation CD.
4. At the beginning of Windows
driver. When prompted, insert the SATA / SATAII driver diskette containing the
Intel
®
RAID driver. After reading the floppy disk, the driver will be presented.
4 0
4 0
4 0
4 0
4 0
ASRock 4Core1600P35-WiFi+ / 4Core1600P35-WiFi Motherboard
XP / XP 64-bit OS on your system. (Windows
®
XP / XP 64-bit on your system. At
®
XP / Windows
XP-64bit OS, if you want to manage
®
®
setup, press F6 to install a third-party RAID
®
2000 is
®
RAID driver. After
®
XP or "Intel(R) ICH8R/
®
XP 64-bit.
®
environment,
®
®
Werbung
Inhaltsverzeichnis
