Inhaltsverzeichnis
Werbung
Step 2.
Install one Radeon graphics card to PCIE1 slot. For the proper installation
procedures, please refer to section "Expansion Slots".
Step 3.
Install the other Radeon graphics card to AGI Express slot (PCI
Express x4). For the proper installation procedures, please refer to section
"Expansion Slots".
Step 4.
Connect two Radeon graphics cards by installing two CrossFire
CrossFire
Bridge Interconnects on the top of Radeon graphics cards.
TM
(CrossFire
Bridge is provided with the graphics card you purchase, not
TM
bundled with this motherboard. Please refer to your graphics card vendor for
details.)
CrossFire
TM
Step 5.
Connect the DVI monitor cable to the DVI connector on the Radeon graphics
card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert the DVI
connector to D-Sub interface, and then connect the D-Sub monitor cable to the
DVI to D-Sub adapter.)
ASRock 4Core1600P35-WiFi+ / 4Core1600P35-WiFi Motherboard
Bridge
Bridge on
TM
2 1
2 1
2 1
2 1
2 1
Werbung
Inhaltsverzeichnis
