What You See On The Screen; The Main Screen - CarTrek 400 Gebrauchsanweisung

Once you have selected a language, your
Cartrek 400 navigation solution will start
automatically.

. What you see on the screen

When your Cartrek 400 is ready for navigation,
you will see the navigation menu. You will also
always see this menu if you click on the middle
of the main screen while navigating or on the
"menu" button on the right hand side of the
device itself. This menu (also called "Quick pick
menu") provides access to all features of the
device
1
Cartrek 400 Software manual
You can select a feature by clicking on the
relevant icon. The four main features are further
explained in this user guide. The "routing" icon
gives access to several options (see image
above, right), that are explained in section 5 and
further.
The "options" icon in the quick pick menu also
gives access to several preference options, that
are explained in section 14.

. The main screen

The main screen is used to navigate you to your
destination. This is the traditional "map view"
(see image). If the device has GPS reception,
your position is indicated by a little blue arrow in
the middle of the screen. The purple/red path in-
dicates the calculated route to your destination.
If you have not yet given in a destination and
you go to the main screen (and the device has
GPS reception), the little arrow will just indicate
your postion; there is no purple/red path and
you will not get (audio) instructions.
Please note that the little blue arrow indicating
your position, might sometimes point in the
wrong direction (not the direction the front end
of the car is in). This might happen if you are not
driving. The device needs movement in order to
see in what direction you are travelling.