Herunterladen Diese Seite drucken

Thermia MBH Calibra 200 Installationsanleitung Seite 21

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Installation Guide
Expansion valve
Expansion vessel charge pressure
Operating pressure
Temp and pressure release valve
Maximum primary working pressure
WARNING TO THE USER
(a) Do not remove or adjust any component part of this unvented wa-
Danger
ter heater. Contact the installer.
(b) If this unvented water heater develops a fault, such as a flow of hot
Danger
water from the discharge pipe, switch the heater off and contact the
installer.
WARNING TO THE INSTALLER
(a) This installation is subject to building regulation approval, notify
Danger
the Local Authority of intention to install.
(b) Use only manufacturer's recommended replacement parts.
Danger
(c) Installed by:
Name: ___________________________________________________
Adderss: _________________________________________________
Tel No: __________________________________________________
Completion date: _________________________________________
Thermia AB
MBH
086L5801 rev 2
6 bar
3 bar
5.5 bar
10 bar; 90 - 95 deg
1.5 bar
21

Werbung

loading