Herunterladen Diese Seite drucken

Thermia MBH Calibra 200 Installationsanleitung Seite 20

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Installation Guide
Tel. No . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If these instructions are not followed during installation, operation and maintenance, Thermia heat pumps liability according to the ap-
plicable warranty is not binding. Thermia heat pumps retains the right to make changes to components and specifications without prior
notice.
3.2.5
UK-specific appendix
Important information/Safety regulations
N
N
N
This document is an integral and essential part of the product. It should be kept with the appliance so that it can be consulted by the
user and our authorised personnel. Please read carefully the instructions and notices about the appliance contained in this manual, as
they provide important information regarding the safe installation, use and maintenance of the water heater.
Manufacturer labels
The water heaters are marked with durable, permanently fixed labels.
Additional label
This label will ensure that this product conforms to the requirements of United Kingdom Building Regulations. The information is entire-
ly valid in a UK specific installation.
Product *)
MBH-200
MBH-300
Calibra-200
Calibra-300
MBH
Maximum water supply pressure
Pressure reducing valve
20
MBH
For important information and safety regulations, please read the
Thermia MBH installation/maintenance manual.
Hard Water Areas; In areas where exceptional water conditions prevail,
consideration may need to be given to the fitting of a device capable
of inhibiting scale. In such circumstances the advice of the local water
authority should be sought.
Leave this document with the end-user.
Weight when full (kg)
285
410
267
400
086L5801 rev 2
10 bar
3 bar
Thermia AB

Werbung

loading