Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Guide
3
English, Installation
3.1
Installation
This appliance can be used by children aged 8 years and above, and
Warning
by persons with reduced physical, sensory or mental capabilities or
lack of experience or knowledge, provided that they are supervised or
have been instructed in the safe use of the appliance and understand
the hazards involved. Children must not clean or carry out user main-
tenance on the appliance except under adult supervision.
Piping installation must be carried out in accordance with applicable
N
local rules and regulations. The hot water tank must be equipped with
an approved safety valve (supplied).
The tank must be connected to an expansion tank and safety valve in
N
such a way that the connection cannot be shut off.
The highest permitted temperature in the MBH tanks is 100°C, both on
N
the secondary and primary side.
As the water temperature in Diplomat Optimum G2/G3, Diplomat Duo
N
Optimum G2/G3 and Diplomat Inverter L/M becomes extremely hot, a
mixing valve must be installed between the cold water and hot water
pipes to ensure a lower domestic hot water temperature.
It is important that the heating system is bled after installation. Bleed
N
filters must be installed where necessary.
Ensure that the pipe installation is carried out in accordance with the
N
dimensions and connection diagrams.
When disassembling the product, applicable laws and regulations
N
must be observed. Contact your installer for more information.
Thermia AB
MBH
086L5801 rev 2
15
Werbung
