Herunterladen Inhalt Inhalt Diese Seite drucken

Replacing The Battery; Technical Specifications - Elkron DC600S Anleitung

Mit weißem oder braunem trägheitssensor
Vorschau ausblenden Andere Handbücher für DC600S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Replacing the battery

1. Open the device by undoing the cover fixing screw.
2. Remove the flat battery and press the Tamper switch twice to discharge the device completely.
3. Insert the new CR123A 3V lithium battery in the housing, respecting the correct polarity.
4. Reposition the cover to the base and fasten the cover fixing screw.

Technical specifications

Power: one 3V CR123A lithium battery
Battery life: 6 years (typical value, can vary according to use)
Two-way radio frequency: 868.6375 MHz
Working temperature range -10°C to +45°C
Dimensions: 85 mm x 30 mm x 20 mm
Weight: 50g
Compliant with EN 50131 Degree 2, ClassⅡ
Hereby, URMET S.p.A. declares that the radio equipment type: WHITE OR BROWN MINI MAGNETIC CONTACT WITH
SHOCK DETECTOR DC600S and DC600S/BR is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.elkron.com.
DS80MM1L-001
SIMPLIFIED EU DECLARATION OF CONFORMITY
ELKRON
Tel. +39 011.3986711 - Fax +39
011.3986703
www.elkron.com
– mail to: info@elkron.it
ELKRON is a trademark of URMET S.p.A.
Via Bologna 188/C – 10154 Turin (TO) Italy
www.urmet.com
9
MADE IN TAIWAN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dc600s/br

Inhaltsverzeichnis