Herunterladen Inhalt Inhalt Diese Seite drucken

Types Of Bag Closures - Union Special BCE200 Serie Originalbetriebsanleitung, Wartungsanleitung Und Illustriertes Teileverzeichnis

Economy sackzunähmaschinen korrosionsgeschützte teile
Inhaltsverzeichnis

Werbung

BCE211UA26-1M: Sewing machine for closing filled bags
and sacks made of paper or plastic foil (minimum thickness
of foil .007 in. (0.18 mm) with a two thread double locked
stitch, and simultaneously binding the bag mouth with a 2"
to 2 1/2" (50 to 63 mm) wide crepe paper or plastic tape
(folder adjustable).Presser foot accomodates easy open
tapes.
For use with bag feed-in devices.
With electro-pneumatically operated guillotine-type thread
chain and tape cutter, operating pressure: 44 to 59 PSI (3 to
4 bar).
Sewing speed with crepe paper tape: up to approx.
12m/min.(at 8 mm stitch length).
Degree of protection of solenoid valve: IP65 (IEC 529).
Control Voltage: 24 V DC.
Seam Specification:
Stitch Range:
Standard Setting:
Capacity Under Presser
Foot:
Sewing Capacity on Paper
Bags:
Working Diameter
Hand Wheel:
Maximum Speed:
Weight Net:
BCE211UA25-1: Same as BCE211UA26-1M, but without
any electro-mechanical components and without solenoid
valve.
10008A Blind Looper (extra send and charge item) will
produce single thread chain stitch.
Stitch type: 101 (ISO 4915 / ASTM Standard No. D6193-
USA).

TYPES OF BAG CLOSURES

BCE211P01-1, BCE211P15-1
BCE211P16-1M, -1A, -1B
BCE211U25-1
BCE211UA26-1M
3.01.01/401 (ISO 4916/4915)
401 BSa-1 (ASTM Standard
D6193– USA)
6 mm to 11.5 mm (2.2 to 4.2
SPI)
8 mm (3 SPI)
12.7 mm (1/2 inch)
up to 32 plies, depending on
weight of paper
100 mm (4 inch) .
up to 2000 stitches/min.,
depending on stitch length,
speed of conveyor, type of
operation, and material to be
sewn.
43 kg
Fold over closure manually
by operator or by additional
bag feed-in device with bag-
top fold-over device.
BCE211UA26-1M: Nähmaschine zum Zunähen gefüllter
Säcke und Beutel aus Papier oder Plastikfolie (Mindeststärke
der Folie 0,18 mm) mit einem Zweifaden-Doppelkettenstich,
bei gleichzeitigem Einfassen der Sacköffnung mit einem 50
bis 63 mm breiten Krepppapier- oder Kunststoffreiterband
(Bandapparat einstellbar). Drückerfuss geeignet für "easy
open" Band.
Zur Verwendung mit Sackzuführeinrichtungen.
Mit elektropneumatisch betätigter Fadenketten- und Band-
abschneid-Guillotine, erforderlicher Luftdruck: 3 bis 4 bar.
Nähgeschwindigkeit bei Krepppapier-Reiterband: bis
12 m/min. (bei 8 mm Stichlänge).
Schutzgrad des Magnetventils: IP65 (IEC 529).
Steuerspannung: 24 V DC.
Nahtbild:
Stichlänge:
Standard-Einstellung:
Durchgang unter dem
Drückerfuß:
Maximale Nähgutdicke
bei Papiersäcken:
Wirksamer Durchmesser
des Handrads:
Maximale Drehzahl:
Gewicht netto:
BCE211UA25-1: Wie BCE211UA26-1M, jedoch ohne elektro-
mechanishe Komponenten und ohne Magnetventil.
10008A Einfachkettenstichgreifer (Extra-Bestellung) pro-
duziert einen Einfaden-Einfachkettenstich.
Nähstichtyp: 101 (ISO 4915 / ASTM Standard No. D6193-
USA).
SACKVERSCHLUSSARTEN
BCE211P01-1, BCE211P15-1
BCE211P16-1M, -1A, -1B
BCE211U25-1
BCE211UA26-1M
6
3.01.01/401 (ISO 4916/
4915) 401 BSa-1 (ASTM
Standard D6193– USA)
6 mm bis 11,5 mm
8 mm
12,7 mm
bis zu 32 Lagen, abhängig
vom Papiergewicht
100 mm
bis 2000 Stiche/Min., abhän-
gig von Stichlänge, Trans-
portbandgeschwindigkeit,
Einsatzzweck und Material.
43 kg
Umschlagverschluß von
Hand durch Bediener
oder durch zusätzliche
Sackzuführeinrichtung
mit
Sackumfalteinrichtung.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis