Bosch Sensixx'x DA70 Gebrauchsanleitung Seite 18

6 Release the "clean" button, and gently shake
the iron for some seconds.
7 Repeat the steps 5 and 6 three times until the
tank is empty.
8 Then plug the iron in and heat it up again until
the remaining water has evaporated.
Push the "clean" button a few times more to
clean the valve.
9 Unplug the iron and let the soleplate (7) cool
down. Wipe the soleplate with a damp cotton
cloth only.
C "Calc'nClean" with descaling liquid *
For deep descaling, it is recommended to use
the descaling liquid especially developed by
Bosch. This procedure should be carried out
every 3 months.
1. Fill the water tank (11) with tap water mixed
with a measure (25 ml) of the descaling liquid
(16*).
2. Then follow the procedure described above in
section "Calc'nClean" (steps 2 to 9).
The descaling liquid may be purchased from our
after-sales service or specialist shops.
Name of accessory: TDZ1101
D anti-calc*
The "anti-calc" cartridge has been designed to
reduce the build-up of scale produced during
steam ironing, helping to extend the useful life of
your iron. Nevertheless the "anti-calc" cartridge
cannot remove all of the scale that is produced
naturally over time.
18
B O SC H
"TextileProtect" fabric
protector *
TextileProtect

See the leaflet sides
The fabric protector (15*) is used for steam-
ironing delicate garments at maximum
temperature without damaging them.
The fabric protector may be purchased from our
after-sales service or specialist shops.
Name of accessory: TDZ1550
"StoreProtect" *
StoreProtect
The "StoreProtect" accessory (17*) enables
an immediate and safe storage of the iron,
even with a hot soleplate (7).
This accessory may be purchased from our
after-sales service or specialist shops.
Name of accessory: TDZ1750
* Model dependent