SAINT ALGUE Demeliss One SA-191 Bedienungsanleitung Seite 4

must be replaced by the manu-
facturer, its service agent or simi-
larly qualified persons in order to
avoid a hazard.
Burn hazard. Keep appliance out
of reach from young children,
particularly during use and cool
down.
When the appliance is connected
to the power supply, never leave
it unattended.
Always place the appliance with
the stand, if any, on a heat-resis-
tant, stable flat surface.
BEFORE USING THE DEVICE
- Remove all packaging.
- Clean the device using a slightly damp cloth. Dry the device.
- Fully uncoil the power cable.
INSTRUCTIONS FOR USE
- Before using the device, make sure your hair is clean and tangle-
free.
- Plug-in the device.
- To turn the device on, press the ON/OFF button for 3 seconds. A
long beep sound will indicate the device is ON.
- Once the device is ON, the plates temperature will instantly start
increasing until reaching the 200°C temperature.
- During heating-up phase, the LED indicator around the ON/
OFF button will start flashing. Once the maximum temperature is
reached, two beep sounds will indicate that the device is ready for
use, and the LED indicator will stop flashing and stay on.
The approximate heating time is between 9 seconds and 11 seconds.
- Once straightening is over, to turn the device off press the ON/
OFF button for 3 seconds, then unplug it. Leave it for few minutes
for cooling.
-The device has a safety automatic shut-off function. The device will
automatically turn off after one hour.
Switch-off and unplug the device, then allow it to cool.
Remove any hair that may have been left on the device.
Clean the device using a slightly damp cloth and then dry it.
WARNING! Do not immerse the device and/or its power cable in
liquid: risk of short-circuit or electric shocks.
CLEANING
4