Beper P102FRU001 Handbuch Seite 7

EN
Hand blender Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Warnings for use
Before using the blender, check its integrity and the one of power
cord.
Pay close attention to the cutting blade particularly when the plug is
plugged in the socket.
Before removing the ingredients, which attached to the blade during
processing, disconnect the plug from the socket.
Do not operate the blender for more than 30 seconds, to avoid
overheating, and wait at least 5 minutes before using it again.
Use the hand blender on a horizontal surface.
Do not immerse the motor unit in water or other liquids.
Before assembling, disassembling or cleaning the hand blender
unplug it from the mains socket.
Description Fig. A
1. Cord supply
2. Hang ring
3. Speed selector I
4. Stainless steel blade
5. Motor unit
6. Removable shaft
Instruction for use
Assembly the hand blender Fig. B
Insert the shaft on the motor unit, and screw.
To remove the shaft, unscrew from the motor and separate the two components.
How to use the hand blender
After assembly the hand blender and check it is correctly assembled, connect the power cord to the socket.
The stainless steel blade allows to chop the ingredients into the container.
To get better results, it is necessary to give to the hand blender a rotating movement into the container.
At the same time it is necessary to keep the blade completely immerse into the ingredients to avoid splash.
7