Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick installation guide IB-1817Ma-C31
4. Place the delivered thermal pad
directly on the M.2 NVMe SSD.
5. Put the heatsink on the thermal pad
and align the notch to the screw nut.
6. Install the PCB back into the track
inside the housing.
Pay attention to the correct alignment!
7. Install the cover and fasten two
screws. Please make sure the write pro-
tection switch is placed in the square
hole when installing the cover.
Note! Change the write-protect mode
before connecting to computer*
Werbung
