Quick installation guide IB-183WP-C31
Important product information
Dear customer,
please note the following information about the compatibility of USB Type-C
enclosures and adapters, including this device!
•
Your host computer must have a USB Type C
•
The IB-183WP-C31 also works with notebooks and computers with
USB 3.0/2.0/1.1 Type-A interfaces as long as the appropriate adap-
ter is available. Furthermore, the Type-C
with USB 3.0 or 2.0 standard in some notebooks and computers. The
enclosure only supplies the full speed of 10 Gbit/s to USB 3.1 (Gen 2)
Type-C
™
•
The enclosure also works on devices with a Thunderbolt
with the transfer rate of up to 10 Gbit/s specified by USB 3.1 (Gen 2).
•
Furthermore, the USB 3.1 drivers must be installed by the operating
system. If this is not the case, install the appropriate drivers for your
operating system (Windows
visit www.icybox.de.
Packing content
1x IB-183WP-C31
1x Type-C
to Type-C
™
1x tool for write protection switch
1x screw driver
1x set of screws
1x quick installation guide
SSD not included
Key features
•
Interface to host computer: USB 3.1 (Gen 2) Type-C
•
Activation of write protection via switch
•
B-Key socket for SSD with B-Key or B+M-Key, 22x 42/60/80 mm
•
Supports SATA III transfer rate of up to 6 Gbit/s
•
Housing made of high-grade aluminium
•
LEDs for power, access and write protection status
•
Supports Windows
interfaces.
cable (40 cm)
™
, macOS
®
interface can be connected
™
, macOS
). For more information, please
®
®
®
interface.
™
3 interface
™
, up to 10 Gbit/s
™
™