Installation And Use - GET HOUR METER Handbuch

C. INSTALLATION AND USE
Press the multi-function button. The
display will show "Loc", indicating
that Lock Mode is active. Press
the button once more to turn Lock
Mode off.
1.
Test if the device works
properly before installing it
permanently on the bike. Turn
on the engine and place the
device where it will be fitted
(we suggest the outer part of
the frame), pressing two fingers
firmly on the sides of the device
with the engine idling.
The device will
automatically after about 8
seconds. The hourglass icon on
the left side of the display will
start blinking. This means that
the device has started to count.
WARNING: all digits will blink if
the device detects an anomaly.
Please contact your dealer if
this happens.
2.
Cle a n t he a pplic at ion
sur f ace
ins t a lling t he dev ice. A low-
re sidue s olvent like acet one
is re commende d.
turn on
c a ref ully before
4
3.
Recommended positions
Frame (keep away from spots
hotter than 70°C /158°F)
Upper Triple Clamp
Under Seat / Subframe (in a
protected position)
EN IT