AXENT ONE Bedienungsanleitung Seite 12

ADDITIONAL FEATURES
10
LE VE L 1 S I G NAL TO N
Factory setting:
You are in the mode level 1: The «Ambient light» flashes slowly.
– Turn the multifunction knob counterclockwise.
Single «beep»
Two «beeps»
LE VE L 1 S E AT H E ATI N G
For AXENT.ONE only
Plus
Factory setting:
You are in the mode level 1: The «Ambient light» flashes slowly.
– Hold down the multifunction knob.
– Turn it clockwise.
Single «beep»
Two «beeps»
Three «beeps»
LE VE L 1 AUTO MATI C S E LF- C LE AN I N G
For AXENT.ONE only
Plus
As soon as you sit down on the shower toilet, the spray arm is automatically cleaned with fresh
water. This function can be activated and deactivated.
Factory setting:
You are in the mode level 1: The «Ambient light» flashes slowly.
– Hold down the multifunction knob.
– Turn it counterclockwise.
Single «beep»
Two «beeps»
The signal tone is activated.
The signal tone is deactivated.
The signal tone is activated
The seat heating is activated.
The seat heating is activated. The temperature of the
seat heating can be adjusted using the remote control.
The seat heating works the same way as «energy
saving mode» on page 19.
The seat heating is deactivated
Automatic self-cleaning function is activated.
Automatic self-cleaning function is activated.
Automatic self-cleaning function is deactivated.