Safety Information; General Safety Notes; Safety During Operation - AWG Z2 Originalbetriebsanleitung

AWG I Operating manual I Fittings I
2

SAFETY INFORMATION

The AWG Inductors Z2, Z4 and Z8 are in line with the state of the art
as well as the recognised safety regulations. The safety and health
protection requirements have been met. Nevertheless, their use may
give rise to hazards for the user or third parties or cause damage to the
device itself or other material assets.
2.1

General safety notes

The device may only be operated in accordance with these instruc-
tions and in perfect condition.
The operators must have received the necessary training to be able
to handle the device properly.
Unauthorized modifications or the installation of additional compo-
nents not approved by the manufacturer endanger the proper func-
tioning of the device.
– Modifications to the device are prohibited
– Only use accessories approved by the manufacturer
The operator is responsible for safety in the vicinity of the device, in
particular for compliance with the general safety regulations. This
includes ensuring, before switching on the entire extinguishing sys-
tem, that all protective devices are fully in place and functional.
2.2

Safety during operation

Observe all safety rules and protective measures applicable for use
at the place of use.
Make sure the device does not get damaged during transport, in-
stallation, commissioning, operation or maintenance.
The safety regulations laid down in the country-specific service
regulations for firefighters (for example in Germany the Feuerwehr-
dienstvorschrift FwDV) or the corresponding internal company
regulations must be observed.
M1061B10 I Rev. 01-02/20
Inductors Z2, Z4 and Z8
ENGLISH
SAFETY INFORMATION
25 / 40