Introduction; Key To The Symbols - AWG Z2 Originalbetriebsanleitung

AWG I Operating manual I Fittings I
1

INTRODUCTION

This manual contains important information regarding your personal
safety. This manual must be read and understood by all persons who
handle or use the device during any phase of its life cycle.
The manual must be close at hand at the place of use throughout the
device's life cycle. All persons handling the device must be able to
consult the manual at any time. The manual must be handed over
along with the device when the device is sold.
1.1

Key to the symbols


This check mark indicates a prerequisite that must be fulfilled be-
fore a task can be carried out.
1. These numbered items list all the steps making up a task.
1.1.1 Safety information
DANGER
Red signal bar and the signal word DANGER
Hazard with a high degree of risk, resulting in death or serious injury
if not avoided.
WARNING
Orange signal bar and the signal word WARNING
Hazard with a high degree of risk that may result in death or serious
injury if not avoided.
CAUTION
Yellow signal bar and the signal word CAUTION
Hazard with a low degree of risk that may result in minor injuries
if not avoided.
M1061B10 I Rev. 01-02/20
Inductors Z2, Z4 and Z8
ENGLISH
INTRODUCTION
23 / 40