Install The Device - ELRO PRO PS4910 Anleitungshandbuch

Caution: Do not install smoke alarms in areas where
humidity is high or where false alarms may occur due
to, for example, cooking fumes or exhaust fumes.
Choose for heat alarms instead of smoke alarms in
bathrooms, kitchens and garages. These alarms react
to temperature rises and not to smoke. Visit
www.elro.eu for the range of heat alarms.
Ceiling or wall mounting
Place the smoke alarm on the ceiling in the middle of
the room. If ceiling mounting is not possible, attach it
to the wall. Make sure that there is a clear space
around all the device so that it is not obstructed.
Do not install a smoke detector:
•
In draughty locations.
•
Near air conditioners/ventilation systems.
•
Directly above a heater.
•
Less than 50 cm. away from furniture
•
(such as tall cabinets) that may block air
circulation.
Sloping ceilings
If you have a sloping, pitched
or cathedral ceiling, place the
smoke alarm at a minimum of
0,5 m. and a maximum of 1 m.
from the highest point.
For more tips on how to install your smoke alarm, for example in rooms with ceiling beams, go
to www.elro.eu.

Install the device

1. Use the mounting plate as a guide where the holes should be drilled.
2. Drill 2 holes with a diameter of 5 millimetres.
3. Push the plugs into the holes.
4. Screw the bracket into the wall or ceiling with the screws.
0,5 m.
0,5 m.
- 5 -
LIVING ROOM
DINING
HALLWAY/ ESCAPE ROUTE
KITCHEN
Wall mounting
Ceiling
Floor
1/3
0,5 m.
Ceiling mounting
Ceiling
Floor
1/2
BEDROOM
BEDROOM BATHROOM
0,3-0,5 m.
1 m.
1/3 1/3
Max. 6 m.
1/2
0,5 m.
0,5 m.