Step Frequency; Modulation Type; Keylock - Albrecht AE75H Bedienungsanleitung

Step frequency

You can change Step Frequency. The scanner have some steps as
5.0/6.25/8.33/10.0/12.5/20.0 kHz and Default. Step Frequency is applied
in Quick Search, Custom Search, AIR Service Search, and Close Call.
Step Frequency is stored every each Band Coverage.
1. Press Func+ Step, then indicates current Step Frequency. And
disappears, PGM appears.
2. Select a Channel Step by Scroll Control knob. (for AIR, 8.33kHz or
12.5kHz) (for 84-88 MHz Band Plan 1 / 84.015-87.295 Band Plan
2, 20kHz step is added)
3. Press E or scroll Control knob, then the Step Frequency is
inputted.
Note :
Press L/O or .Clr if you cancel this function when displays Step
Frequency.
If you wants to set default Step Frequency for current Band, select
dEFULt."
If the scanner is turned off, step frequency is set to initial setting.

Modulation Type

You can change Modulation Type. Modulation Type is applied in Quick
Search, Custom Search, CB Service Search, HAM Service Search, and
Close Call. Modulation Type is stored every each Band Coverage. And
every Channel Memory for Memory Channel Scan is able to store
Modulation Type.
1. Press Func + Mod, then current Modulation Type changes.
2. Press Mod to choose a Modulation Type.
3. Press Func, then
Note: If the scanner is turned off, modulation is set to initial setting. (For
CB band and HAM band, the modulations are kept)

Keylock

Use the scanner's key lock to protect it from accidental program
changes. When the scanner's keys are locked, the only controls that
operate are scroll control knob (volume only), Func, Hold, and
72
F disappears.
English
F
.