Priority - Albrecht AE75H Bedienungsanleitung

To unlock all registered channels in enabled banks, press Hold to stop
scanning, then press and hold L/O until the scanner beeps twice and
CLEAr displays.
Notes:
Locked-out frequencies are shared between Service Search,
Custom Search, Quick Search, and Close Call modes. If locked-
out frequencies are set in a specific mode, those frequencies are
also skipped in other Search and Close Call modes.
If you selected all frequencies in a search band to be skipped, the
scanner beeps 3 times and does not search.
You can skip 100 frequencies for Temporary Lockout and100
frequencies for Permanent Lockout (200 locked-out frequencies
total). After locking out 200 frequencies, the next time you try to
select a frequency to skip the scanner displays Full and will not
lock out that frequency.
If you want to find your locked-out frequencies, press Hold and
then turn the scroll control knob to cycle through the frequencies.
L/O or T/LO displays on the locked-out frequencies.

Priority

The Priority feature lets you scan through the channels and still not miss
important or interesting calls on specific channels. There are three
Priority options available in Scan or Scan Hold mode:
Priority Off (no display): The scanner does not check for priority
channels.
Priority DND (
scanner checks Priority channels every 2 seconds only when it is
not receiving transmissions.
Priority Scan (PRI displays): The scanner checks Priority channels
every 2 seconds regardless of whether or not it is receiving a
transmission.
You can designate one channel in each bank as a priority channel (10
total).The first channel in each bank is the default Priority channel.
Follow these steps to select a different channel in a bank as the priority
channel.
70
PRI displays): In Priority Do Not Disturb (DND), the
English