Software Update; Auto Update; Usb Update - Samsung HW-Q70T Bedienungsanleitung

11 SOFTWARE
UPDATE

Auto Update

When the Soundbar is connected to the Internet,
software updates automatically occur even when
the Soundbar is turned off.
• To use the Auto Update function, the
Soundbar must be connected to the Internet.
The Wi-Fi connection to the Soundbar will be
terminated if the Soundbar's power cord is
disconnected or the power is cut off. If the
power is cut off, when the power comes back
on or you reconnect the power cord, turn on
the Soundbar, and then reconnect it to the
Internet.

USB Update

Bottom of the Soundbar
NETWORK ID SET
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
DC 19V
SERVICE
Micro USB to
USB adapter Cable
(not supplied)
Samsung may offer updates for the Soundbar's
system firmware in the future.
When an update is available, you can update the
Soundbar by connecting the USB drive that
contains the update firmware to the SERVICE
port of the Soundbar.
For more information about how to download
update files and upgrade the version, go to the
Samsung Electronics website
(www.samsung.com) → search for the model
name from the customer support menu option.
Initialisation
With the Soundbar on, press the
buttons on the body at the same time for at least
5 seconds. "INIT" appears on the display and then
the Soundbar is initialised.
• All the settings of the Soundbar are
initialised. Be sure to perform this only when
initialisation is required.
HDMI
HDMI TO TV
(eARC/ARC)
ENG - 21
Top of the Soundbar
CAUTION
INIT
(Volume)